4 Channel Relay Board 5V

Optoisolated 4 Channel Relay Module
Low Trigger Input Signals
3 Outputs Per Relay: NO, NC and C
Max Current Rating: 10A @ 250 VAC

ADIY four-channel relay module contains four 5V relays and the associated switching and isolating components, which makes interfacing with a microcontroller or sensor easy with minimum components and connections. The contacts on each relay are specified for 250VAC and 30VDC and 10A in each case, as marked on the body of the relays.

39 People watching this product now!

Description

4 Channel Relay 5V – This is ADIY 4 Channel Isolated 5V 10A Relay Module. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on can control it. It is also able to control various appliances and other types of equipment with a large current. Relay output maximum contact is AC250V 10A and DC5V 10A. One can connect a microcontroller with a standard interface directly to it. Red working status indicator lights are conducive to safe use. It has a wide range of applications such as all MCU control, industrial sector, PLC control, and smart home control. Ready to get switching on your Raspberry Pi?! This neat relay module features 4 x 5V relays rated at 10A/250V each. It is designed to switch up to 4 high currents (10A) or high voltage (250V) loads with the help of a microcontroller! Each relay can individually switch on/off by an opto-isolated digital input, which can connect directly to a microcontroller output pin. It only requires a voltage of approx 1.0V to switch the inputs on but can handle input voltages up to 5V. This makes it ideal for 1.0V to 5V devices.

Specifications:- 4 Channel Relay Board 5V

One normally closed contact and one normally open contact
Channel: 4 channel
Relay Operating Voltage: 3.3V to 5V
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
Power supply indicator and Control indicator lamp
Power supply and relay instructions, lit, the disconnect is off;
The input signal, signal, common Terminal, and start conducting;
Useful for appliance control;
DC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.