Description
ADIY FLY Pico RP2040 Board comes with a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with a unique Programmable I/O (PIO) subsystem, RP2040 provides professional users with unrivalled power and flexibility. ADIY FLY pairs RP2040 with 4MB of Flash memory, and a power supply chip supporting input voltages from 3.5-5.5V. It provides 27 GPIO pins, 4 of which can function as analogue inputs, on 0.1”-pitch through-hole pads with castellated edges. ADIY FLY Pico RP2040 Board has SD card slot installed. The RESET button on ADIY FLY makes the usage of module easy.
RP2040 is manufactured on a modern 40nm process node, delivering high performance, low dynamic power consumption, and low leakage, with a variety of low-power modes to support extended-duration operation on battery power.
Key features: Pico RP2040 Board – ADIY FLY
- RP2040 microcontroller with 4MB Flash
- Micro-USB B port for power and data (and for reprogramming the Flash)
- 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
- Exposes 27 multi-function 3.3V General Purpose I/O (GPIO)
- 23 GPIO are digital-only and 4 are ADC capable
- Can be surface mounted as a module
- 3-pin ARM Serial Wire Debug (SWD) port
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
- Simple yet highly flexible power supply architecture
- Various options for easily powering the unit from micro-USB, external supplies or batteries
- High quality, low cost, high availability
Specifications:
- Form factor : 21 mm × 51 mm
- CPU : Dual-core Arm Cortex-M0+ @ 133MHz
- Memory : 264KB on-chip SRAM; 4MB on-board Flash
- Interfacing : 27 GPIO pins, including 4 analogue inputs
- Peripherals :
2 × UART.
2 × SPI controllers
2 × I2C controllers
16 × PWM channels
1 × USB 1.1 controller and PHY, with host and Device support
8 × PIO state machines
- Input power : 3.5–5.5V DC
- SD Card Slot : Included
- Operating temperature : -20°C to +85°C
- Reset button : Included
Resources: RP2040 Board Pico – ADIY FLY
Documentation for Pico RP2040 Board – ADIY FLY and other RP2040-based boards.
